TIMER NAMES:

VOR$-A01
HT1%-A02
SKM&-A03
GFO&-A04
LED#-A05
HT2%-A06
LM3&-A07
RTN&-A08
ALM&-A09

MY CURRENT PROGRAM:

\\ defaults always ON: Return Pump, Skimmer, LM3, GFO, VORTECH

If Time > 00:00       Then RTN ON
If Time > 00:00       Then SKM ON
If Time > 00:00       Then LM3 ON
If Time > 00:00       Then GFO ON
If Time > 00:00       Then VOR ON

\\ LED on at 2, off at 9. I will adjust this to seasonal very soon. Just got the AC3 set up again.

If Time > 14:00       Then LED ON
If Time > 21:00       Then LED OFF

\\ Seasonal temp. table being used. Right now it is 75* average on Apo Reef, and I just got the aquarium set back up, so I’m not using the seasonal exactly until everything is on schedule and settled. I will implement the seasonal table as-is in June when it’s ~78 or 79*F.

If Temp  < RT+2.0      Then HT1 ON
If Temp  > RT+2.5      Then HT1 OFF
If Temp  < RT+2.1      Then HT2 ON
If Temp  > RT+2.6      Then HT2 OFF

\\ Alarm for too hot or too cold. I expect with LED’s and being in a basement, I won’t have the high temp alarm very often

If Temp  > RT+5.0      Then ALM ON
If Temp  < RT+-5.0      Then ALM ON

\\Feed Cycle A (Feeding)

If FeedA 005         Then SKM OFF
If FeedA 000         Then RTN OFF
If FeedA 015         Then VOR OFF

\\ Feed Cycle B (Water Change)

If FeedB 000         Then SKM OFF
If FeedB 000         Then RTN OFF
If FeedB 000         Then VOR OFF

\\ Power outage, wait 5 min to turn on Return pump, then after that’s been on 2 minutes, turn on the Skimmer

If Power 005        Then RTN OFF
If Power 007        Then SKM OFF